Coe Press Equipment Manufactures Roll Feed, Power Straighteners, Servo Roll Feeds for all your Press Feeding Application Needs. Coe Press Equipment designs and manufactures the heaviest and widest coil feeding systems available for the metalstamping industry today. With dedicated Research and Development along with the introduction of the ServoMaster Series of roll feeds, the company moved into the new century, maintaining its dominant leadership position and steady growth within the marketplace.

Join the Coe Press Equipment Mailing List
Email:

Heavy Gauge Coil Feeding Line Installed by Coe Press Equipment for Oxford Automotive Includes Digital Roll Feed, Threading Table, Power Straightener and Coil Reel.

Conventional coil fed line installed by Coe Press Equipment for Oxford Automotive (Greencastle, IN)

This heavy gauge coil feeding line is designed to process high-strength steel for the production of automotive frames and was installed on an existing machine. The processing line includes servo digital roll feed, free standing power straightener, threading table, and coil reel for pull off operations.

Installed at: Oxford Automotive, Greencastle, Indiana. Heavy-gauge coil feeding system designed to process high-strength steel for the production of automotive frames. Installed on an existing press.

AC Servo Drive Digital Roll Feed
Model No. CPRF-872

Material type: HSLA steel
Maximum
Material
Thickness:		 .200” x 48” wide – HS steel 120,000 yield
.187” x 72” wide – HS steel 70,000 yield

High performance, maintenance-free AC brushless servo motor. Air operated pilot pin mechanism. ServoMaster controller. Heavy-duty cabinet base with press mount brackets and +/-6” of height adjustment. Dual handcrank edge guides with self centering and independent adjustment. 5 roll entrance catenary section with full sideplates and funnel assures proper material support. Motorized passline adjustment. End of stock shut-off electric eye. Full width upper and lower feed rolls. Customer supplied SmartPac to be installed in Coe enclosure. Manual adjustable exit support table.

Threading Table
Model No. CPDTT-7218

Heavy duty steel solid top construction. Adjustable passline. Air raise and lower of threading table. Dual sided table construction.

Free Standing Power Straightener
Model No. SPGPS-562-72

Pay off rate of up to 100 fpm. 5 roll catenary support section. #3 matte chrome finished upper and lower entrance pinch rolls. Hydraulic cylinder raise and lower of pinch rolls. 7 straightener rolls (5.62” dia.) for optimum straightening capability. Edge guide material width scales and pointers. Straightener-mounted 3 position selector switch for ultra sonic loop control. 75HP AC variable speed drive with special blower-cooled with feedback. Digital upper straightener roll height indicators. Hydraulic peeler / threader / hold down station with motorized endwheel. 8” diameter input and output pinch rolls. Both upper and lower straightening rolls are equipped with double row backup rollers (each with dual 6” wide rollers). Allen Bradley with Panelview operator interface and machine control. Self-centering vertical edge guides with offset capabilities. Special optional Sesco pinch roll / hydraulic crop shear / threading table / scrap gondola…

  • 8” dia. hydraulically motorized lower pinch roll
  • 10” dia. upper pinch and breaker roll for threading
  • Crop shear base is heavy-duty construction
  • Operated by dual direct hydraulic cylinders
  • Shear slide moves in guide bars with bearings
  • Shear designed to operate in down cut mode
  • Upper and lower knife with 4 cutting edges
  • Shear blades will be of high carbon, high chrome tool steel
  • Shear blades shim adjusted to maintain clean out
  • Threading table provided across gondola car area
  • Scrap gondola car has flat bed and runs on floor guided with track
  • Safety blocks with interlock plugs for shear maintenance provided

Coil Reel For Pull Off Operations
Model No. CPR-PO-60072

Maximum Coil Weight: 60,000 lbs.
Maximum Coil Width: 72”

Bearing tube support of mandrel. Two sets of (3) heavy-duty coil keepers. Centralized controls for straightener and reel. Full radius mandrel pads with matching keepers. Proportional air brake system. Double three stage brake. Clutch for heavy-duty hydraulic motor. Coil clock spring guard. Hydraulic traveling coil car with 18” of vertical lift. Heavy-duty, hydraulically-operated hold up arm.

Back to Top
• The Next Generation in
Direct Transfer Press Feed Systems
• Cut-To-Length and Blanking Line — Various
• Progressive Die/Blanking Line — Midway Products
• Heavy Gauge Line — Oxford
• Non-Marking Line — Trane
• Space Saving Line — Toledo Tool & Die
• Transfer Press Line — Midway Products
• Push-Pull Line — Majestic
• Zig-Zag Line — Sigma Stamping
• Conventional Coil Feed Line — A&Z Automotive
•

Feeder / Straighteners — Marada Industries
© 2005-2007 Coe Press Equipment Company