Join the Coe Press Equipment Mailing List
Email:

Complete Coil Fed Transfer Press Feed Line Installed by Coe Press Equipment has AC Servo Drive Roll Feed, Threading Table, Power Straightener And Coil Reel.

Complete coil fed transfer press feed line installed by Coe Press Equipment

Complete coil processing line used for transfer press feeding from Coe Press Equipment, is comprised of AC Servo Drive Roll Feed, Threading Table, Power Straightener, Coil Reel, Material Conveyor and Production Shear. Additional integration includes an automated material conveyor system and production shear to facilitate square cut blank production.

Installed at: Midway Products, Findlay, Ohio. Direct transfer press feeding system installed on a 2000 ton Muller Weingarten press. Capable of processing square-cut blanks into pick-up stations.

72” Wide AC Servo Roll Feed
Model CPRF 672

Material Specifications:

MCRS – Max: 0.210” thick @ 36.00” wide
MCRS – Min: 0.020” thick @ 72.00” wide
MCRS –Max: 0.187” thick @ 72.00” wide

3 roll catenary support section with full side plates and funnels. Dual roll edge guides with self-centering & independent adjustment. Cluster gear driven upper feed roll with mating splinted shafts and gears. Heavy-duty cabinet with press mount brackets. Rigid machined tie bar construction for precise assembly. End of stock shut-off electric eye. Full width upper and lower feed rolls. Special options include:Allen Bradley Control Logix feed line controls; Allen Bradley drives, motors, and motion controls; Allen Bradley Panelview 1000 operator interface; fixed servo feed base with integrated hydraulic shear; quick disconnect plugs and receptacles for servo feed.

72” Threading Table
Model No. CPPT 7212

Heavy duty steel solid top construction. Thread table length. Adjustable passline feature. Air raise and lower of threading table. Dual sided table construction.

4” x 72” Power Straightener
Model No. CPPS 400 72

Payoff Rate:

up to 100 fpm

Air Cylinder Bore:

 6.0”

Pinch Roll Dia.:

 6.28”

Breaker Roll Dia.:

 4.00”
Rigid tie bar construction of straightener head. #3 matte chrome upper and lower entrance pinch rolls. 40 horsepower AC variable speed drive – digital control. PLC controls and operator touch screen. 3 roll catenary support section with full side plates and funnels. Digital upper straightener roll height indicators. Double row upper and lower straightener backup rollers. Peeler/threader/hold down station with motorized endwheel. Trabon automatic lubricant system. Ultra sonic variable speed loop control with 3 position selector switch. Special options include: Allen Bradley drives, motors, and motion controls, and Panelview 1000 operator interface.

60,000# 72” Coil Reel
Model No. CPR-PO 60072

Maximum Coil Weight: 60,000 lbs
Maximum Coil Width: 72 inches
Maximum Coil O.D.: 72 inches
Hydraulic mandrel expansion feature. Hydraulic threading drive feature. Material width scales on mandrel pads. One set of 3 quick release narrow coil keepers. Automatic mandrel expansion circuit. Coil car jog 4 button pendant. Hydraulic traveling coil car with 18" of vertical lift.

Material Conveyor
Model No. 9863-MC: CPMC-72

Heavy-duty structural framework provided to mount the blank conveyer system. Programmable servo drive provided to optimize accel, decel, and speed of the blanks. Station located inside the press column and designed to clear the transfer mechanism. Magnets located between the conveyor lanes to control the blanks. Pickup station with 2 front stops to help locate the parts as they are indexed into the station. Digital reference indicator provided and adjustment by motor and encoder. Passline of the conveyor system adjusted by a motorized screw jack arrangement. Adjustment +/- 5” at the end of the conveyer and at the corresponding angle. Position of the end stops and the passline height stored in the job recipe matrix

Shear
Model No. SPGS-73

Production shear integrated into a common machine base with the servo roll feed. Production shear top actuated by a hydraulic cylinder arrangement – 2 cylinders. Shear ram guided by heavy duty guide bars that travel in precision guide bushings. Shear blade indexable with 4 cutting edges to optimize time between sharpenings. Provided with an adjustable air operated hold down to maintain control of material during cut.

Back to Top

• Cut-To-Length and Blanking Line — Various
• Progressive Die/Blanking Line — Midway Products
• Heavy Gauge Line — Oxford
• Non-Marking Line — Trane
• Space Saving Line — Toledo Tool & Die
• Transfer Press Line — Midway Products
• Push-Pull Line — Majestic
• Zig-Zag Line — Sigma Stamping
• Conventional Coil Feed Line — A&Z Automotive
• Feeder / Straighteners — Marada Industries

 
© 2005-2007 Coe Press Equipment Company