|
Complete coil fed zig-zag press feed line installed by Coe Press Equipment
Installed
at: Sigma Stamping, Auburn Hills, Michigan.
Heavy-duty zig-zag system for the production of multiple-out blanks.
Producer of torque converter housings.
AC
Servo Drive Digital Roll Feed
Model No. CPRF-660 Zig Zag
| Maximum
Material Thickness: |
.080”
x 60” wide |
| .187”
x 35” wide |
3
roll entrance catenary base with press mount brackets & +/-
6” of height adjustment. 3 roll entrance catenary section
with full sideplates and funnel. Partial width upper and lower feed
rolls. Optional features: C.P.E.C. Controller for zig-zag operations;
dual hand crank edge guides with self centering & independent
adjustment; motorized passline adjustment; zig-zag servo feed option
with 30” of side shuttle |
Threading
Table
Model No. CPDTT-6018
Heavy
duty steel construction. Adjustable passline. Air raise and lower of
threading table. Dual sided table construction.
Free
Standing Power Straightener
Model No. CPPS-400-60
7 straightener
rolls (4” dia.) for optimum straightening capability. Independent
adjustment of straightening rolls. Electrical safety disconnect. Hand
crank entrance edge guides. Central point lubricant system. 25 HP AC
variable speed drive – digital control. Hydraulic options for
peeler / threader / hold down station. Motorized straightening roll
adjustment. Reel to straightener tie in brackets. Remote jog pendant
for material threading. Single row upper and lower straightener backup.
Ultra sonic variable speed loop control. Upper straightener roll L.E.D.
height indicators.
Coil
Reel For Pull Off Operations
Model No. CPR-PO-40060
| Maximum
Coil Weight: |
40,000
lbs. |
| Maximum
Coil Width: |
60” |
Bearing
tube support of mandrel. Material width scales on mandrel pads.
Extra set of 3 narrow coil keepers. Hydraulic traveling coil car
(CPTCC-40060). Remote jog pendant for material threading. 18”
of vertical lift. |
Back
to Top
|
