|
Complete coil feed line utilizing push pull feed operations installed by Coe Press Equipment
Installed
at: Majestic Industries, Macomb Township, Michigan. Unique
push-pull feed system designed for the tryout of large progressive dies
at tool and die builder (also uses for production stamping). Installed
on Eagle Press.
AC
Servo Drive Digital Push-Pull Roll Feed
Model No. CPRF-PP-672
| Maximum
Material Thickness: |
.080”
x 72” Wide |
| Minimum
Material Thickness: |
.010”
x 72” Wide |
| Maximum
Material Thickness: |
.0125”
x 36” Wide |
|
Feed Roll Body Width: |
72”
Full Width |
CLM-LZ
Controller for push-pull operations. Tight loop/end of stock shut
off electric eye. Heavy-duty cabinet base with passline adjustable
+/- 5” by means of 10,000 lb. leg jacks. Entrance edge guides
with self-centering and motorized pass line adjustments. 5 roll
entrance catenary support section. #3 matte chrome coated upper
and lower feed rolls. Press mount pads to match press. 72”
wide air shear for processing scrap materials mounted integral to
the pull feed. |
Threading
Table
Model No. CPDTT-7211
Air raise
and lower of the threading table. Fixed passline feature. Dual-sided
table construction. Based on 11-foot loop.
Free
Standing Power Straightener
Model No. CPPS-305-72
7
Roll, 3 Inch Diameter Design With 5” Pinch Rolls)
|
Maximum Material Thickness: |
.080”
x 72” wide |
| Payoff
Rate: |
up
to 80 FPM |
| Pinch
Roll Dia.: |
5.00" |
| Breaker
Roll Dia.: |
3.00" |
Independently
adjustable breaker rolls raise and lower by means of 1 ton screw
jacks. #3 matte chrome coated upper and lower entrance pinch rolls.
5 roll exit catenary support section with full sideplate and funnel.
Peeler / threader / hold down station with motorized end wheel
and 4 position stock peeler with wide nose. Central point lube
system. Double row upper and lower breaker rolls backups rollers.
20 HP AC variable speed drive. Ultrasonic loop control system
with 3-position selector switch. Entrance edge guide with self-centering
hand crank adjustments – 2.25” x 7.5” long rolls.
Reel-to-straightener tie in bracket.
|
Coil
Reel
Model No. CPR-PO-30072
| Maximum
Coil Weight: |
30,000
lbs. |
| Maximum
Coil Width: |
72” |
| Maximum
Coil O.D.: |
72"
Single Speed |
| Mandrel
Expansion Range: |
20-25” |
One
set of 3 coil keepers. Hydraulic mandrel expansion. Hydraulic
threading drive. 3 stage air brake with dual pressure. 3 pad mandrel
with full radius pads – 100 degrees. Extra set of 3 coil
keepers. Remote reel jog control with coil cord. Hydraulic traveling
coil car, complete with track.
|
Back
to Top
|
