|
SpaceMaster Series 1 Compact Coil Line
from Coe Press Equipment
The Series 1 SpaceMaster:
Process
up to 24" Coil Widths,
.125" Thicknesses with this
Single Space-Saving Unit
 Coe
Press Equipment’s SpaceMaster Series 1 Compact Coil Line Series,
the smallest of three size ranges of space-saving, multi-functioning coil
lines combining the three functions of unwinding, straightening and feeding
of coil stock…all on a single unit. Different model and size configurations
are available.
For your
smaller capacity coil feeding needs, our SpaceMaster Series 1 comes in
four model sizes to process maximum coil widths of 12”, 16”,
20” or 24”. As standard, Series 1 models can process coil
thicknesses to .125”, coil O.D.’s to 60”, and handle
a maximum coil weight of 4,500 pounds.
A drastic
floor space reduction on the stamping room floor is its key benefit, but
without compromise in processing speed, reliability and overall performance.
The system is mounted on a common machine base, helping to maximize rigidity
during the feeding process. It includes a combination straightener/feeder
unit and eliminates the need for an excessive slack loop area or loop
pit. The overall footprint of a SpaceMaster model can be 12’-15’
— compared to the required length for a similar conventional line
that can measure over 25’.
The SpaceMaster
Series has been designed and built for precision coil stock feeding to
all types of stamping presses. Competitively priced for as much as a 20%
savings to conventional coil handling/feeding systems.
The SpaceMaster
is offered in three size ranges:
- Series
2 (coil widths from 12” to 52”, thicknesses to .187”,
O.D.’s to 60”, and coil weights to 11,000 lbs.)
- Series
3 (coil widths from 18” to 64”, thicknesses to .250”,
O.D.’s to 64”, and coil weights to 20,000 lbs – model
dependent)
Coe
Press Equipment products are backed by our comprehensive “3-2-1”
Warranty.
The equipment
has a three year limited coverage on all major components manufactured
by Coe Press Equipment; two year limited coverage on all mechanical components
originally installed by Coe Press Equipment; and one year full coverage
on the complete system.
About The Company
Coe Press
Equipment Corporation, with headquarters in Sterling Heights, Michigan,
is a leading producer of pressroom feed equipment including servo roll
feeds, power straighteners, coil reels and cradles, and complete coil
processing systems. They also design and engineer fully-integrated coil
processing systems for metal stamping and processing operations.
For more
information, contact Jim Ward at Coe Press Equipment Corporation, 40549
Brentwood, Sterling Heights, MI 48310, (586) 979-4800, fax (586) 979-2970.
Back
to Top
|
