COE Press Equipment has recently shipped a coil processing line to Texas for feeding a 400-ton mechanical press. The stamping line is part of a flexible wrapper and control panel fabrication line producing 14 different sized air conditioning units. For this line the coil stock is fed into the press in variable increments as the louvers are stamped into the metal. The material being processed is .029-inch thick CRS.
The 48-inch wide COE line is equipped with non-marking chrome rolls and other features that make it capable of handling pre-painted grade 60 material at up to 60,000 PSI. It can process materials from 0.030-in. to 0.125-in. thick depending upon the width at up to 396 feet/minute. It is comprised of a ServoMaster™ Series 4 Roll Feed, a 42-in. x 18-ft. dual threading table, a 3.50-in. x 42-in. Power Straightener, and a 15,000# x 42-in. double ended coil reel. Additionally, it has COE's SYNCMaster™ controls, which allow the operator to manage many of the servo feed, straightener, and coil reel setups and functions from a single touchscreen. COE has also provided installation, startup and training.
The 48-inch wide COE line is equipped with non-marking chrome rolls and other features that make it capable of handling pre-painted grade 60 material at up to 60,000 PSI. It can process materials from 0.030-in. to 0.125-in. thick depending upon the width at up to 396 feet/minute. It is comprised of a ServoMaster™ Series 4 Roll Feed, a 42-in. x 18-ft. dual threading table, a 3.50-in. x 42-in. Power Straightener, and a 15,000# x 42-in. double ended coil reel. Additionally, it has COE's SYNCMaster™ controls, which allow the operator to manage many of the servo feed, straightener, and coil reel setups and functions from a single touchscreen. COE has also provided installation, startup and training.
RSS Feed
